Skirstomojo veleno fazės paskirstymo grandinės įrankiai | VW Chrysler Dodge 3.6L 10200A+10202 (JK36) (Kodas: JK36)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Essen tools
10202- Used to hold the Camshaft/Phaser`s while performing the loosening and tightening of the Oil Control Valves during survice on Routan with 3.6 liter Engine
10200A-Used as wedges to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures on Routan 3.6 liter Engine.
2012 and newer models also require 10369A.
Note: 10200-1 & 10200-3 are used on Drivers Side, 10200-2 is used on Passenger's Side.
Some 2011 models may also require 10369A, depending on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A."
10200A-Used as wedges to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures on Routan 3.6 liter Engine.
2012 and newer models also require 10369A.
Note: 10200-1 & 10200-3 are used on Drivers Side, 10200-2 is used on Passenger's Side.
Some 2011 models may also require 10369A, depending on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A."
