Skiedinio maišytuvas | 2 greičiai | 1600W (YT-82607) (Kodas: YT-82607)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
YT-82607
CONSTRUCTION MIXER II GEARS 1600W
Brand
Yato
Entity responsible for this product in the EU
TOYA S.A.More
Power
1600 W
Revolutions
180-480 / 300-750 min⁻¹
Voltage
220-240 V a.c.
Frequency
50/60 Hz
Max. mixer diameter
160 mm
Thread size
M14
Electronically controlled speed
no
Soft start
yes
Rotation direction switch
no
Operation mode switch
no
Max. mass volume
140 l
Cable length
0.9 m
Electrical insulation class
II
Protection class
IP20
Sound pressure
87.0 ± 3.0 dB(A)
Sound power
98.0 ± 3.0 dB(A)
Vibrations
5.23 ± 1.5 m/s²
Weight
6.5 kg
Symbol
YT-82607 Construction mixer II gears 1600 W. Mortar mixer is an electric tool that allows quick and thorough mixing of mortars, paints, adhesives and other liquid construction masses. Adjusting the rotation speed and the possibility of replacing the mixer ensures easy adjustment of the operating characteristics to the mixed mass. Application The machine allows mixing gypsum mortars (plasters, smoothing compounds), as well as cement mortars, self-leveling screeds, tile adhesives. low rotation speed on the first gear is adapted to air binders (drying under the influence of contact with air) - this extends the time of open work on the wall, because you can apply mixed but not aerated mortar and process it with a trowel longer than with a regular mixer (smooth out irregularities gradually)
the mixer can mix up to 140 l of mortar in one cycle, thanks to the high torque, powerful engine and large mixer diameter (140 mm). This is a key feature when working with the currently fashionable fast-acting anhydrite screeds or cement fillers, because you can pour e.g. a bathroom floor in one cycle without the risk that the subfloor poured in several layers will separate from the screed
Speed control The spindle speed should be set using the regulator. The regulator knob has numbers on it, the higher the number visible on the knob, the higher the spindle speed. The speed is regulated smoothly. Additional information: The convenient position of the handles is intended to facilitate the operator's work, because it does not require bending in a forced position when mixing the mortar. the standard M14 thread means that after the mixer is worn out, we can easily replace it with a new one
the machine housing is designed to increase resistance to splashing and dusting characteristic of working with dry mixtures mixed with water
CONSTRUCTION MIXER II GEARS 1600W
Brand
Yato
Entity responsible for this product in the EU
TOYA S.A.More
Power
1600 W
Revolutions
180-480 / 300-750 min⁻¹
Voltage
220-240 V a.c.
Frequency
50/60 Hz
Max. mixer diameter
160 mm
Thread size
M14
Electronically controlled speed
no
Soft start
yes
Rotation direction switch
no
Operation mode switch
no
Max. mass volume
140 l
Cable length
0.9 m
Electrical insulation class
II
Protection class
IP20
Sound pressure
87.0 ± 3.0 dB(A)
Sound power
98.0 ± 3.0 dB(A)
Vibrations
5.23 ± 1.5 m/s²
Weight
6.5 kg
Symbol
YT-82607 Construction mixer II gears 1600 W. Mortar mixer is an electric tool that allows quick and thorough mixing of mortars, paints, adhesives and other liquid construction masses. Adjusting the rotation speed and the possibility of replacing the mixer ensures easy adjustment of the operating characteristics to the mixed mass. Application The machine allows mixing gypsum mortars (plasters, smoothing compounds), as well as cement mortars, self-leveling screeds, tile adhesives. low rotation speed on the first gear is adapted to air binders (drying under the influence of contact with air) - this extends the time of open work on the wall, because you can apply mixed but not aerated mortar and process it with a trowel longer than with a regular mixer (smooth out irregularities gradually)
the mixer can mix up to 140 l of mortar in one cycle, thanks to the high torque, powerful engine and large mixer diameter (140 mm). This is a key feature when working with the currently fashionable fast-acting anhydrite screeds or cement fillers, because you can pour e.g. a bathroom floor in one cycle without the risk that the subfloor poured in several layers will separate from the screed
Speed control The spindle speed should be set using the regulator. The regulator knob has numbers on it, the higher the number visible on the knob, the higher the spindle speed. The speed is regulated smoothly. Additional information: The convenient position of the handles is intended to facilitate the operator's work, because it does not require bending in a forced position when mixing the mortar. the standard M14 thread means that after the mixer is worn out, we can easily replace it with a new one
the machine housing is designed to increase resistance to splashing and dusting characteristic of working with dry mixtures mixed with water
