Smūginis griovimo / demontavimo plaktukas | 70J | 1600W (YT-82002) (Kodas: YT-82002)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
Mark
Yato
Symbol
YT-82002
Functions
shoeing
Power
1600 W
Impact energy
70 J
Stroke frequency
1900 min⁻¹
Tension
230 V a.c.
Frequency
50 Hz
Type of tool holder
hexagonal
Tool holder size
30mm
Stroke
yes, electropneumatic
Oil cooling
Yes
Switch lock for continuous operation
Yes
Electrical insulation class
II
Level of security
IPX0
Sound pressure
91.3 ± 3.0 dB(A)
Acoustic power
100.4 ± 2.42 dB(A)
Vibrations
14.59 ± 1.5 m/s²
Mass
14.8 kg
Set contents
demolition hammer, cutter, punch
Application
concrete, reinforced concrete, asphalt, natural and artificial stone, marble The most powerful (70J) demolition hammer in its class, oil-cooled (5W30) Designed for demolishing reinforced concrete, e.g. footings, slabs reinforced with A-III and A-0 steel, chipping away at ceilings or compacting soil, with an appropriate tip (YT-47385 to be purchased separately). It passes the test when forging horizontally, thanks to the short piston stroke and high impact frequency (which does not cause the effect of pushing the operator and the hammer away from the wall when it is held horizontally, instead of forging, which is characteristic of many hammer designs on the market). Effective oil cooling protects the machine against overheating during heavy work and, thanks to its lower viscosity than grease, causes lower frictional resistance in the mechanism, significantly extending the life of the device. The anti-vibration handle protects the hammer operator against the adverse effects of vibrations and reduces fatigue caused by holding a working hammer. The large diameter of the piston of the electro-pneumatic mechanism guarantees high energy of a single impact (up to 70J), which allows for the effective chipping of a large volume of concrete per unit of working time. The Hex handle (diameter 30 mm) works with self-sharpening chisels for reinforced concrete, shovels for digging in hard ground, soil tamper and classic pointed chisels up to wide chisels (35, 75, 125 mm). Yato index range from YT-47370 to YT-47385). Parameters power [W]: 1600
impact: electropneumatic
application: concrete, reinforced concrete, brick
handle: hex
impact energy [J]: 70
voltage [V]: 220-240
number of strokes [1/min]: 1900
number of revolutions [1/ min]: 0
work functions: forging
Yato
Symbol
YT-82002
Functions
shoeing
Power
1600 W
Impact energy
70 J
Stroke frequency
1900 min⁻¹
Tension
230 V a.c.
Frequency
50 Hz
Type of tool holder
hexagonal
Tool holder size
30mm
Stroke
yes, electropneumatic
Oil cooling
Yes
Switch lock for continuous operation
Yes
Electrical insulation class
II
Level of security
IPX0
Sound pressure
91.3 ± 3.0 dB(A)
Acoustic power
100.4 ± 2.42 dB(A)
Vibrations
14.59 ± 1.5 m/s²
Mass
14.8 kg
Set contents
demolition hammer, cutter, punch
Application
concrete, reinforced concrete, asphalt, natural and artificial stone, marble The most powerful (70J) demolition hammer in its class, oil-cooled (5W30) Designed for demolishing reinforced concrete, e.g. footings, slabs reinforced with A-III and A-0 steel, chipping away at ceilings or compacting soil, with an appropriate tip (YT-47385 to be purchased separately). It passes the test when forging horizontally, thanks to the short piston stroke and high impact frequency (which does not cause the effect of pushing the operator and the hammer away from the wall when it is held horizontally, instead of forging, which is characteristic of many hammer designs on the market). Effective oil cooling protects the machine against overheating during heavy work and, thanks to its lower viscosity than grease, causes lower frictional resistance in the mechanism, significantly extending the life of the device. The anti-vibration handle protects the hammer operator against the adverse effects of vibrations and reduces fatigue caused by holding a working hammer. The large diameter of the piston of the electro-pneumatic mechanism guarantees high energy of a single impact (up to 70J), which allows for the effective chipping of a large volume of concrete per unit of working time. The Hex handle (diameter 30 mm) works with self-sharpening chisels for reinforced concrete, shovels for digging in hard ground, soil tamper and classic pointed chisels up to wide chisels (35, 75, 125 mm). Yato index range from YT-47370 to YT-47385). Parameters power [W]: 1600
impact: electropneumatic
application: concrete, reinforced concrete, brick
handle: hex
impact energy [J]: 70
voltage [V]: 220-240
number of strokes [1/min]: 1900
number of revolutions [1/ min]: 0
work functions: forging
